Selasa, 04 Januari 2011

Beranda »

Service Panasonic Alfa gold

Here we'll describe a little damage Panasonic Alfa Gold we have ever experienced.

> Over the regulator output voltage.
If this is not addressed will cause more damage fatal. This damage can we know the beginning of the following symptoms;
- When first turned on is not immediately menagkap tv broadcasts, a new normal after some time. This is due to less stable supply voltage for VT due overnya tuner output voltage regulator when first turned on.
- Shortnya ZD on tuners TEG Supply for VT, if this happens then when we onkan tv tv does not want to live and there was a "ngiiik".
To overcome these problems over regulator we have to replace all elco whose value is 47 micro-regulator circuits. If we replace elco has fixed voltage over then, check resistor826 whose value is 22ohm, usually drop out.

> Relay sound "ceklek-ceklek", do not want on tv. Damage usually occurs on the R803 is worth 470k.

> Disearching passed, difine can-tuning. Check out the TEG at AFT AN5192K IC pin 30, if no voltage, usually ZDnya short.

> When exposed to light images (too much contrast) tv dead, red LED life. R525 end, it was worth 22k.

> Picture no sound normal, normal audio IC. This often happens. diode damage adjacent to the audio IC, PCB edge is located, replace it with D 4007.

> menu To enter service mode: press the V-Disply on tv and on radio and remote, to exit press the "N" (normal) on the remote.
download schematic tv here
Sumber :   http://electronic-camp.blogspot.com/2010/04/schema-tv.html

www.isunuklir.blogspot.com